AT&T MERLIN LEGEND Release 3.1, System Programming Manual

Page: 313 / 887

System Features
Common Administrative Procedures
3–177
●
Extension Procedure
Console Display/Instructions Additional Information PC
1 Specify the extension to which calls are to be redirected.
Unassign Calls Ext:
Enter extension
Backspace
Exit
Enter
SP: “Entering an Extension”
Û
2 Save your entry.
Select
Enter Enter
.
0
3 Return to the System Programming menu.
Select
Exit Exit
.
5
◆
Group Calling Procedure
1 Enter the extension of the calling group to which calls are to be redirected.
Unassign Calls Grp Call:
Enter extension number
of group
Backspace
Exit
Enter
Dial or type [ nnnn ].
Û
2 Save your entry.
Select
Enter
Enter
.
0
3 Return to the System Programming menu.
Select
Exit
Exit
.
5
Host System Dial Codes for Behind Switch
Mode
Use this procedure to assign the host system dial codes for the Transfer,
Conference, and Drop features.
When multiline telephone users press the Transfer , Conference , or Drop
button, a signal is sent to the host service and the communications’ system
features are not accessed. Assigning dial codes to these features ensures that
users can take advantage of them through the host system.
NOTE:
This procedure applies to Behind Switch mode only.