AT&T MERLIN LEGEND Release 3.1, System Programming Manual

Page: 197 / 887

Telephones
Common Administrative Procedures
3–61
Console Display/Instructions Additional Information PC
4 Save your entry.
Select
Enter Enter
.
0
If you get the Station Busy message, wait
for an idle condition or exit system
programming and try again later.
5 Assign the extension.
● ◆
Extension xxxx :
xxxx = extension number entered in Step 3
Assign lines/trunks
_
Lines 01-20 Entry Mode
_
For a single line/trunk, go to
_
Lines 21-40
●
Single Line/Trunk Procedure.
_
Lines 41-60
_
Lines 61-80
For a block of lines, go to
Exit
◆
Block Procedure.
l
l
Single Line/Trunk Procedure
1 Specify entry mode.
Select
Entry Mode
Entry Mode
.
6
2 Enter the line or trunk number.
Extension xxxx :
xxxx = extension number entered
Enter line/trunk numbers
in Step 3
Delete
Backspace Next
Exit Enter
Dial or type [ nnn ].
Û
3 Assign or remove the specified line/trunk number.
Select
Enter Enter
or
0
Delete
Delete
.
8
You may continue to assign or remove
lines/trunks by repeating Steps 2 and 3.
4 Assign a single line/trunk to the next extension or go to Step 5.
Select
Next
Next
9
Return to Step 2 to continue programming. The
next extension will be displayed on Line 1.
5 Return to the System Programming menu.
Select
Exit Exit
two times.
55