AT&T MERLIN LEGEND Release 3.1, System Programming Manual

Page: 108 / 887

Using SPM
2–30
Programming with SPM
3 Use the arrow keys to highlight
GOTO FLOPPY
and press
R
.
GOTO FLOPPY
Please select file name FILENAME.XXX
to convert from
,
FILENAME.YYY
then press Enter
Press ESC to abort.
FILENAME.XXX and FILENAME . YYY from
the \spm\backup directory
After you press
R
, the
GOTO FLOPPY
statement shown above changes to
GOTO HARD DISK
and a directory listing from the root directory of the floppy disk
appears. Go to Step 4.
GOTO HARD DISK
Please select file name FILENAME.XXX
to convert from , FILENAME.YYY
then press Enter
Press ESC to abort.
FILENAME.XXX and FILENAME.YYY from
the root directory of the disk in
Drive A.
4 Use the arrow keys to highlight the name of the backup file to be converted and
press
R
.
■
If the backup file you select is a 4.0 backup, it can not be converted and
the following message appears:
File has already been converted.
Press Enter to continue.
Press
R
to select another filename, or press
E
to abort the convert
procedure.
■ If the backup file you select can be converted, go to Step 6.
5 Observe the updated file selection screen and press
R
.
FILENAME.XXX = the backup filename
selected in Step 4
Please select file name
N = drive
to convert from
,
then press Enter
N: FILENAME.XXX
Press ESC to abort.