AT&T MERLIN LEGEND Release 3.1, System Programming Manual

Page: 700 / 887

Integrated Administration
4–328
Programming Procedures
Set Up
You cannot program the common information until you have completed basic
setup programming for the communications system. Use SPM or the system
programming console to program the following:
■
Mode of operation
■
System numbering
■
System operator positions
■
Phantom extensions
■
Lines/Trunks to pools assignment
NOTE:
If you do not want all lines to have the same application services, you must
assign lines with the same services to the same pools
Programmable Options
When you complete the system setup, you can use the information in Table 4–6
to program through Integrated Administration.
Table 4–6. Programming through Integrated Administration
Option Factory Setting Range
Automated Attendant Calling Group 770
Call Answer Calling Group 7926
FAX Response Calling Group 7924
Information Service Calling Group 7927
Message Drop Calling Group 7928
Voice Mail Calling Group 7925
Coverage Group 30 1 to 30
Reliable Disconnect yes
Delay Ring 2 rings 1 to 6 rings
Coverage Delay Ring 3 rings 1 to 9 rings
VMS Transfer Return Interval 6 rings 0 to 9 rings
Transfer Return Time 6 rings 0 to 9 rings
The information programmed through Integrated Administration is shared with
the communications system control unit. The information does not have to be
programmed again when you program the communications system.