AT&T MERLIN LEGEND Release 3.1, System Programming Manual

Page: 449 / 887

DS1 Facilities
Programming Procedures
4–77
◆
S56 Data Procedure
Console Display/Instructions Additional Information PC
1 Enter the channel number ( nn = 1 to 24).
S56 Data Lines Slot xx:
xx = slot number entered in Step x.
Enter channel num (1-24)
Delete
Backspace
Exit
Enter
Dial or type [ nn ].
Û
2 Assign or remove the channel.
Select
Enter
Enter
or
0
Delete Delete
.
8
If you select
Enter Enter
, continue with Step 3. If
you select
Delete
Delete
, return to Step 1.
3 Select an option.
▲ ✚
£ £
✱
¤
S56 Data Signaling:
If you select Direction, go to
1
Make a selection ▲
Direction procedure.
_
Direction Disconnect
Intype Inmode
If you select Intype or Outtype, go to
2
Outtype Outmode
✚
Trunk Seizure Type procedure.
3
AnsSupvr
Exit
If you select AnsSupvr, go to
4
£
Answer Supervision Timing Procedure.
If you select Disconnect, go to
5
✱
Disconnect Timing Procedure.
If you select Inmode or Outmode, go to
6
¤ ¤
Dial Mode Procedure.
7
▲
Direction Procedure
1 Select Direction.
S56 Data: Ch xx:
xx = channel selected in Step x.
Enter channel direction
_
Two Way
_
Outgoing
_
Incoming
Select
Two Way
,
1
Next Outgoing
, or
2
Exit Enter Incoming
2
2 Continue to assign direction to the next channel or go to Step 3.
Select
Next Next
.
9
Return to Step 1. The next channel will be
displayed on Line 1.