AT&T MERLIN LEGEND Release 3.1, System Programming Manual

Page: 179 / 887

QCC Optional Features
Common Administrative Procedures
3–43
Console Display/Instructions Additional Information PC
6 Assign operators to the receive calls from the next Group Coverage number or
go to Step 7.
Select
Next Next
9
Return to Step 4. The next Group
Coverage number will display on Line 1.
7 Return to the System Programming menu.
Select
Exit Exit
five times.
55555
u
u
Call Type Procedure
1 Select Operator.
****
**** = option name selected in Step 4
Make a selection
Priority
_
Operator
Exit
2
2 Specify the operator position.
**** Operator:
****
= option name selected in Step 4
Enter QCC operator
extension number (0=init)
If no DSS is attached :
SP: “Entering an Extension”
Û
Delete
If DSS is attached :
Backspace
Toggle the red LED on or
Exit Enter
off as required.
On = operator receives call type.
Flashing = operator does not receive call type.
Off = extension is not an operator position.
3 Assign or remove the operator from the call type specified in Step 4 of the main
procedure.
Select
Enter Enter
or
0
Delete Delete
.
8
You may continue to assign or remove
QCC operators from the call type by
repeating Steps 2 and 3.
4 Return to the System Programming menu.
Select
Exit Exit
five times.
55555