AT&T MERLIN LEGEND Release 3.1, System Programming Manual

Page: 375 / 887

Basic System Operating Conditions
Programming Procedures
4–3
1 Select the System menu.
System Programming: >
Make a selection
_
System Extensions
SysRenumber Options
Operator Tables
LinesTrunks AuxEquip
Exit NightSrvce
1
2 Select System Restart.
System:
Make a selection
_
Restart MaintenBusy
SProg Port Date
Mode Time
Board Renum Back/Restore
Exit
1
3 Respond to the query.
System Restart:
To restart the system select
Yes Yes
. The
1
System will be down ...
system restart screen appears.
Do you want to continue?
_
Yes
To terminate the restart and return to the
_
No
System menu select
No No
, then select
2
Exit Exit
.
5
_
Exit
Restart
The session is finished, and the system
System is restarting
restarts. You must enter system
programming again to continue.
System Programming Position Assignment
Use this procedure to reassign the extension used for system programming. This
extension should not be the same extension as that used for the operator
position. The system programming position can be reassigned only to one of the
first five extension jacks on the first MLX module. Only one system programming
console is allowed per system.