AT&T MERLIN LEGEND Release 3.1, System Programming Manual

Page: 244 / 887

Optional Telephone Features
3–108
Common Administrative Procedures
Trunk-to-Trunk Transfer
Use this procedure to enable or disable trunk-to-trunk transfer at an extension.
When trunk-to-trunk transfer is disabled, users cannot transfer an outside call to
an outside line.
NOTE:
A single-line set can never perform a trunk-to-trunk transfer.
Summary: Trunk-to-Trunk Transfer
Programmable by System manager
Mode All
Idle Condition Not required
Planning Form Form 4b, Analog Multiline Telephone
Form 4d, MLX Telephone
Form 4e, MFM Adjunct: MLX Telephone
Form 4f, Tip/Ring Equipment
Form 5a, Direct-Line Console (DLC): Analog
Form 5b, Direct-Line Console (DLC): Digital
Form 5c, MFM Adjunct: DLC
Form 5d, Queued Call Console (QCC)
Data Form 1a, Modem Data Station
Data Form 1b, 7500B Data Station
Factory Setting Disabled
Valid Entries Enabled, Disabled
Inspect Yes
Copy Option No
Console Procedure
Extensions
®
More
®
More
®
TrkTransfer
®
Toggle LED
On/Off or Dial ext. no.
®
Enter
®
Exit
®
Exit
PC Procedure
6
®
u
®
u
®
7
®
Toggle letter
R
On/Off or Type
ext. no.
®
0
®
5
®
5
Procedure: Trunk-to-Trunk Transfer
Console Display/Instructions Additional Information PC
1 Select the Extensions menu.
System Programming: >
Make a selection
System
Extensions
_
SysRenumber Options
Operator Tables
LinesTrunks AuxEquip
Exit NightSrvce
6