Amada S-2200CA, Operation Manual

Page: 92 / 210

CHAPTER 3: USING PROGRAMMING FUNCTIONS
IS-2200CA/4500CA INVERTER POWER SUPPLY
3-38 990-412
1 2 3 4 5 6 7
1 2 3 4 5 1 2
1 2 2 2 3 0 1
CAUT ION
CAUT ION GOOD GOOD GOOD GOOD
Judgment
range
Number o f we lds
COUNT UP
COUNT UP
count va lue
count va lue
ERROR
COUNT
CAUT ION
output
output
RESET
RESET
output
output
is TOTAL
COUNTER
COUNTER
is GOOD
Examp le ) PRESET COUNT=3
ERROR
ERROR
NOTES:
•
When ERROR RESET is input, display of MA-660A , TROUBLE lamp on panel and
ERROR/CAUTION output are turned OFF, but COUNT UP output is not turned OFF.
•
When COUNT RESET is input, display of MA-660A , TROUBLE lamp on panel and
COUNT UP output are turned OFF, but CAUTION output is not turned OFF.
•
The chart above represents the occasion where ERROR/CAUTION output is set to N.O.
(NORMAL OPEN): Open at normal / Closed at error.
WELD2 STOP/WELD COUNT is WELD2 STOP and COUNTER is WORK
Set WELD COUNT and WORK COUNT. When PRESET WELD COUNT is set to 0, the weld
count is not incremented. Also, when the PRESET WORK COUNT is set to 0, count-up is not
done.