Amada S-2200CA, Operation Manual

Page: 39 / 210

IS-2200CA/4500CA INVERTER POWER SUPPLY
990-412 2-1
CHAPTER 2
INSTALLATION AND SETUP
Section I: Planning
Environmental Factors
We recommend that you install the Power Supply in a well-ventilated area that is free from excessive dust,
weld expulsion, acids, corrosive gasses, salt, moisture, oil, coolant, and contaminants. Allow adequate
space around the unit for power and signal cabling runs, water-cooling hose connections, and to open the
front door. Electrical input is made from the top of the Power Supply; output power (to the weld
transformer) is made from the bottom of the Power Supply. Signal connections may be made from either
the top or bottom of the Power Supply.
The Power Supply is designed to work in the following ambient conditions:
•
Temperature: 41-104°F (5-40°C)
•
Humidity: Less than 90%, non-condensing
Space and Mounting Requirements
IS-2200CA IS-4500CA
47.2”
(1,200 mm)
79.0”
(2,005 mm)
19.7”
(500 mm)
31.4”
(797 mm)
15.0”
(381 mm)
55.0”
(1,397 mm)