Amada S-2200CA, Operation Manual

Page: 199 / 210

APPENDIX E: COMMUNICATIONS
IS-2200CA/4500CA INVERTER POWER SUPPLY
990-412 E-11
Item Contents
Character
String
Range
27 UF3 / Initial heat 3 of upslope
nnn.n, 004.0 to 120.0 (kW)
nn.n,
04.0 to 80.0 (kA)
02.0 to 40.0 (kA)
04.0 to 60.0 (kW)
01.0 to 20.0 (kA, kW)
10.0 to 99.9 (%)
n.nn,
0.50 to 9.99 / 0.05 to 5.00 (kA, kW)
0.20 to 9.99 (V)
28 HEAT3 / Heat 3
nnn.n, 004.0 to 120.0 (kW)
nn.n,
04.0 to 80.0 (kA)
02.0 to 40.0 (kA)
04.0 to 60.0 (kW)
01.0 to 20.0 (kA, kW)
10.0 to 99.9 (%)
n.nn,
0.50 to 9.99 / 0.05 to 5.00 (kA, kW)
0.20 to 9.99 (V)
29 DL3 / End heat 3 of downslope
nnn.n, 004.0 to 120.0 (kW)
nn.n,
04.0 to 80.0 (kA)
02.0 to 40.0 (kA)
04.0 to 60.0 (kW)
01.0 to 20.0 (kA, kW)
10.0 to 99.9 (%)
n.nn,
0.50 to 9.99 / 0.05 to 5.00 (kA, kW)
0.20 to 9.99 (V)
30
PULSATION of WE1 / WE1
repetition
nn, 00 to 19
31 INT1 / Interval 1 nnn,
000 to 999 (ms mode)
000 to 050 (CYC mode)
32
PULSATION of WE2 / WE2
repetition
nn, 00 to 19
33 INT2 / Interval 2 nnn,
000 to 999 (ms mode)
000 to 050 (CYC mode)
34
PULSATION of WE3 / WE3
repetition
nn, 00 to 19
35 INT3 / Interval 3 nnn,
000 to 999 (ms mode)
000 to 050 (CYC mode)
36
WELD TRANS FREQ /
Welding transformer
frequency
nnnn,
0600 to 1000 (Hz)
Note: The last 2 digits are fixed to 00.
37 GAIN nn, 1 to 9
38 VALVE n, 1 to 2
39 TURN RATIO nnn.n, 001.0 to 199.9
40 WELD ON/OF n, 0: OFF 1: ON
41 VOLT COMP nnn, Fixed to 3 digits (000 to 100) (%)
42 PULSE LIM of WE1 nn.n, Fixed to 4 digits (10.0 to 99.9) (%)
43 PULSE LIM of WE2 nn.n, Fixed to 4 digits (10.0 to 99.9) (%)
44 PULSE LIM of WE3 nn.n Fixed to 4 digits (10.0 to 99.9) (%)
45 MAX CURRENT nnn, 005 to 80 (kA)
46 TRANS# n 1
*1 The setting of ms/CYC cannot be changed. You can change it via Screen 05 (SYSTEM data).