Amada S-2200CA, Operation Manual

Page: 191 / 210

APPENDIX E: COMMUNICATIONS
IS-2200CA/4500CA INVERTER POWER SUPPLY
990-412 E-3
Configuration
○
1
E
A
RS-232C
Only a device can be connected.
A
○
2
E
A
RS-485
(Note 1) When controlling two or more devices with one host computer, register the device
No. ( CONTROL# ) for each device. Set the device No. on the POWER SUPPLY
STATE Screen , See Chapter 3: Using Programming Functions, Section 2: Power
Supply State Screen .
(Note 2) Do not assign one number to more than one device. Do not send data
simultaneously from two or more devices in the single-directional communication
mode, otherwise, data collision and inappropriate system operations may result.
(Note 3) The RS-232C/RS-485 conversion adapter is not included in the accessories.
The customer preferred adapter must be obtained at the point of installation.
Host comput er
Devi ce No. 1 Devi ce No. 2 Devi ce No. 31
RS-232C RS-485
RS-232C/RS-485 Conver si on Adapt er
31 Devi ces Max.
…
…
Host Comput er
Devi ce No. 1
RS-232C