Amada S-2200CA, Operation Manual

Page: 109 / 210

CHAPTER 3: USING PROGRAMMING FUNCTIONS
IS-2200CA/4500CA INVERTER POWER SUPPLY
990-412 3-55
17. DISPLACEMENT Screen
This screen is used to make a measurement using a displacement gauge and set the weld stop
function.
a. SCHEDULE #
Select from #001 to #255 to set the SCHEDULE .
Normally select #001 first, then select additional schedules in sequential order.
b. WELD STOP INPUT
Select items for weld stop.
OFF : External Input, WE1 to WE3 Stop Input are effective.
DISPLC : Weld Stop works at the set displacement value.
CURR : Weld Stop works at the set current value.
VOLT : Weld Stop works at the set voltage value.
POWER : Weld Stop works at the set power value.
PULSE : Weld Stop works at the set pulse width.
c. WELD STOP CONDITION
Set values for items selected in WELD STOP INPUT .
OFF : Not displayed.
DISPLC : Set the value of displacement.
CURR : Set current value.
VOLT : Set voltage value.
POWER : Set power value.
PULSE : Set pulse width.
d. WORK DETECT LIMIT
(a)
(b)
(c)
(d)
(e)
(f)
(g)
(h)