Amada S-2200CA, Operation Manual

Page: 71 / 210

CHAPTER 3: USING PROGRAMMING FUNCTIONS
IS-2200CA/4500CA INVERTER POWER SUPPLY
990-412 3-17
3. When WELD2 STOP/WELD COUNT is WELD2 STOP and COUNTER is WORK:
WELD COUNTER
and
WORK COUNTER
are displayed. When the count reaches the set
WELD count value, WORK count value is incremented by one. This is different from WELD
COUNTER described below.
4. When
WELD2 STOP/WELD COUNT
is
WELD COUNT:
WELD COUNTER is displayed.
This is different from WELD COUNTER described above.
Monitored Value Notes:
•
Only the last monitored value and the number of counts of each SCHEDULE are kept
for a period of 10 days after the power is turned off.
•
When the repetition welding is performed with PULSATION or OFF time setting, only
the last data is displayed as the monitored value. The passing data is not displayed.
•
The monitor display is not automatically updated depending on the
MONITOR DISP
MODE setting.