Agilent Technologies EasyEXPERT, Manual, Page: 525 / 610

22 IGBT
22.1 Cce: IGBT Cce-Vc characteristics (A.04.00)
[Supported Analyzer]
B1505A
[Description]
Measures Collector-Emitter capacitance (Cce), and plots Cce-Vc characteristics.
For a more accurate measurement, perform correction data measurement at the measurement frequency before
starting the capacitance measurement.
If the measurement frequency is not included in the list of default frequencies below, click the Advanced
Options... button and set the measurement frequency on the Frequency area of the Advanced Options for CMU
Calibration window.
Default frequencies:
1 k, 2 k, 5 k, 10 k, 20 k, 50 k, 100 k, 200 k, 500 k, 1 M, 1.2 M, 1.5 M, 2 M, 2.5 M, 2.7 M, 3 M, 3.2 M, 3.5 M,
3.7 M, 4 M, 4.2 M, 4.5 M, 5 MHz
[Device Under Test]
IGBT, 3 terminals
Connect Collector, Emitter, and Gate to the High Voltage Bias-T High, Low, and AC Guard respectively.
Or, connect Collector, Emitter, and Gate to the Test Fixture MFCMU High, MFCMU Low, and AUX circuit
common respectively.
[Required Modules and Accessories]
Agilent B1520A MFCMU 1 unit
Agilent N1260A High Voltage Bias-T or Agilent N1259A Test Fixture with the option N1259A-020
[Device Parameters]
Polarity: Nch (SMU forces the specified value) or Pch (SMU forces the negative specified value).
Temp: Temperature
YAxisCceMin: Y axis (Cce) minimum value
YAxisCceMax: Y axis (Cce) maximum value
[Test Parameters]
Memo: Memorandum
IntegTime: Integration time
Frequency: Measurement frequency
OscLevel: Measurement signal level
Scale: Scale of DC bias sweep, LINEAR, LOG10, LOG25, or LOG50
Collector: CMU used for the capacitance measurement
VcBias: SMU used for the DC bias sweep source
VcStart: DC bias sweep start voltage
VcStop: DC bias sweep stop voltage
VcLinearStep: DC bias sweep step voltage, effective if Scale=LINEAR
IcLimit: Collector current compliance
[Extended Test Parameters]
HoldTime: Hold time
DelayTime: Delay time
IcMinRange: Minimum range for the collector current measurement
[Measurement Parameters]
Collector-Emitter capacitance Cds
Collector-Emitter current Ids
Agilent EasyEXPERT Application Library Reference, Edition 8
22-3