Agilent Technologies EasyEXPERT, Manual, Page: 260 / 610

8 NanoTech
8.7 CNT IV Sweep: CNT Differential I-V characteristics (A.01.20)
[Supported Analyzer]
B1500A, 4155B, 4155C, 4156B, 4156C
[Description]
Measures the I-V (current vs voltage) characteristics of a CNT 2-terminal device.
This test definition allows one to select the direction of a sweep from "Single" and "Double." When the sweep
start/stop value is not 0 V, outputs a sweep from 0 V to the start value or from the stop value to 0 V to protect a
device.
[Device Under Test]
Carbon Nano Tube FET, 2 terminals
[Device Parameters]
Temp: Temperature
[Test Parameters]
IntegTime: Integration time
Port1: SMU connected to device under test, primary sweep voltage output
Port2: SMU connected to device under test, constant voltage output
V1Start: Sweep output start voltage
V1Stop: Sweep output stop voltage
V1Step: Sweep output step voltage
I1Limit: Port1 current compliance
SweepDirection: Sweep direction
[Extended Test Parameters]
HoldTime: Hold time
DelayTime: Delay time
V2: Port2 voltage
Y_Min: Minimum Y axis value
Y_Max: Maximum Y axis value
R_Max: Maximum Y axis resistance value
Port1MinRng: Minimum range for Port1 current measurement
[Measurement Parameters]
Iport1: Port1 current
[User Function]
Resistor terminal voltage DeltaV=Vport1-Vport2
Resistance R=DeltaV/Iport1
[X-Y Plot]
X axis: Voltage DeltaV (LINEAR)
Y1 axis: Measured current Iport1 (LINEAR)
Y2 axis: Resistance R (LINEAR)
[List Display]
DeltaV: Voltage
Iport1: Measured current
R: Resistance value
Agilent EasyEXPERT Application Library Reference, Edition 8
8-12