Agilent Technologies EasyEXPERT, Manual, Page: 129 / 610

4 GenericTest
4.1 Generic C-f: C-f characteristics of capacitor (2 terminals) (A.03.00)
[Supported Analyzer]
B1500A, B1505A
[Description]
Measures the capacitance and conductance vs frequency characteristics.
For a more accurate measurement, perform Open/Short/Load correction at the measurement frequency before
starting the capacitance measurement.
If the measurement frequency is not included in the list of default frequencies below, click the Advanced
Options... button and set the measurement frequency on the Frequency area of the Advanced Options for CMU
Calibration window.
Default frequencies:
1 k, 2 k, 5 k, 10 k, 20 k, 50 k, 100 k, 200 k, 500 k, 1 M, 1.2 M, 1.5 M, 2 M, 2.5 M, 2.7 M, 3 M, 3.2 M, 3.5 M,
3.7 M, 4 M, 4.2 M, 4.5 M, 5 MHz
[Device Under Test]
Capacitor, 2 terminals
For a more accurate measurement, connect CMU High to device’s Low and CMU Low to device’s High.
[Required Modules and Accessories]
Agilent B1520A MFCMU 1 unit
[Test Parameters]
Port1: CMU connected between capacitance
Vbias: DC bias voltage
FreqStart: Sweep start frequency
FreqStop: Sweep stop frequency
NoOfSteps: Number of measurements
OscLevel: Measurement signal level
Single_Double: Sweep direction (Single/Double)
Linear_Log: Frequency scale (Linear/Log)
OnAbnormalStatus: Auto abort function set up
IntegTime: Integration time
[Extended Test Parameters]
HoldTime: Hold time
DelayTime: Delay time
Range: Measurement range
G_Min: Minimum transconductance value for graph
G_Max: Maximum transconductance value for graph
Cp_Min: Minimum capacitance value for graph
Cp_Max: Maximum capacitance value for graph
[Measurement parameters]
Susceptance B
Conductance G
DC bias monitor data DcMon
AC level monitor data AcMon
Frequency Freq
[User Function]
Agilent EasyEXPERT Application Library Reference, Edition 8
4-3