Volvo EC60E, Руководство оператора, Страница: 187 / 342

In case of engine failure
In case of engine shut down while travelling on a
slope, put the travel lever to neutral position and
lower bucket down to the ground, then start the
engine.
If the engine shuts down on a slope, do not operate
the swing function, since the superstructure may be
swung under its own weight and cause tipping or
side slipping.
Travelling on uneven ground
In case of travelling on uneven ground, reduce
travel speed and operate the machine so as not
to lean to one side more than 10 °.
In case of travelling on flat ground, retract the
attachment and raise it 40 - 50 cm from the
ground.
Working in water and on boggy ground
Be very careful when working on boggy ground.
After working in water or escaping from boggy
ground, replenish the grease to the attachment pins
or the areas affected by the water. Check the idler,
rollers and track drive case oil, if contaminated,
change the oil.
Escaping from boggy ground
In case that one track gets bogged
If one track gets bogged down, raise this track using
the bucket and put a plank under the track.
NOTICE
When the machine is lifted with the aid of the boom
or the dipper arm, the bottom of the bucket should
rest on the ground not the bucket teeth.
Set the angle between boom and arm at 90 ° ~ 110
°.
V1080761
10
o
V1080765
40~50cm
V1080768
186
Operating techniques
Working within dangerous areas