Volvo EC60E Скачать руководство пользователя страница 136

Страница: 136 / 342

Vision system

The machine has a lot of equipment for the operator

to minimize visibility hazards. Using this equipment,

the operator must always ensure good visibility of

the surroundings when operating the machine.

1 Left mirror

2 Right mirror
NOTE!

Right mirror is used as aids for better visibility.
3 Rear-view camera (if installed)
NOTE!

Any modifications done to the machine that affect

the operator's visibility must be verified by a Volvo

dealer.

Camera system (if installed)

The camera screen in the I-ECU (A) is opened by

pressing the camera button (B) on the keypad.

The camera button is illuminated when the camera

view is displayed.

V1177358

Mirrors and camera (if installed)

V1158742

Other controls

Operator comfort

135

Содержание EC60E























































































































































































































































































































































Результаты поиска

Содержание EC60E

Отзывы:

Volvo EC60E, Руководство оператора, Страница: 136 / 342

Результаты поиска

Содержание EC60E

Отзывы: