Volvo EC60E, Руководство оператора, Страница: 164 / 342

Parking
NOTICE
Choose level ground for parking the machine. If the
machine has to be parked on an incline, the tracks
must be blocked with wooden blocks and the bucket
teeth pressed into the ground.
1 Park the machine in service position, with the
piston rods of the digging equipment fully
retracted. In this way they will be protected
against moisture, dust and damage. Rest the
bucket teeth against the ground.
NOTE!
If the machine is not going to be used every day, all
cylinders should be greased as protection against
corrosion.
2 Follow the paragraphs 2 - 5 above of "Stopping".
3 Close and lock all windows, doors and all covers.
4 Disconnect the battery by turning the battery
disconnect switch counter-clockwise and
remove the key.
Long-term parking
Follow the instructions as for parking and in addition
to that:
1 Wash the machine and touch up the paint finish
to avoid rusting.
2 Check the machine for leakage of oil or water,
and defects of the attachments and the tracks.
Replace or repair all damaged or worn parts.
3 Treat exposed parts with anti-rust agent,
lubricate the machine thoroughly and apply
grease to unpainted surfaces like cylinders.
4 Fill the fuel tank and the hydraulic oil tank to the
maximum marks.
5 Make sure that the freezing point of the coolant
is sufficiently low (in cold weather).
6 Place the machine on level, firm ground where
there is no risk of freezing, landslide or flooding.
7 When storing machines in extreme cold
temperatures, remove batteries and store them
at room temperature. Make sure to place the
batteries over a wooden/plastic/rubber surface.
8 Cover the exhaust pipe (for parking out-of-
doors).
V1158744
Operating instructions
Parking 163