Volvo EC60E, Руководство оператора, Страница: 149 / 342

Starting engine
NOTE!
Make sure the control lockout lever is in locked
position, otherwise the engine can not be started.
WARNING
Risk of fatal accidents.
Unauthorised persons within the work area around
the machine could lead to serious crushing injury.
• Clear all unauthorised personnel from the working
area.
• Keep a lookout in all directions.
• Do not touch control levers or switches during
start.
• Sound the horn before beginning operation.
NOTICE
Do not keep the ignition switch in starting position
for more than 20 seconds, as this may seriously
damage the starting system. If the engine does not
start, turn the switch back to stop position and wait
a couple of minutes before the next starting attempt.
NOTICE
If the engine sounds or runs strangely or if strong
vibrations arise, the ignition switch must be turned
to stop position immediately.
NOTICE
Wait until the electronic system is completely shut
down before restarting.
1 Turn the engine speed control switch (A) to the
low speed position and turn the key to operating
position.
2 Sound the horn and let other workers and
bystanders know you are starting the machine.
For the startup sequence, see page 45 .
3 Turn the key to the start position.
4 Release the key when the engine has started.
5 Warm up the machine.
V1158743
A
B
0
1
2
R
A Engine speed control switch
B Ignition switch
Off position (0)
Radio position (R)
Operating (preheating) position (1)
Start position (2)
148
Operating instructions
Starting engine