AC90 TENSION CONTROL FREQUENCY INVERTER MANUAL
Function Parameter specifications
132
Input terminal on/off show diagram:
Output terminal on/off show diagram:
9.13 PID parameters
PID control is used for process control mode normal. For the aim of that the object which be controlled is stabilized as
the PID given, it adjusts inverter output frequency to form passive feedback PID adjustment by series of proportional,
integral, differential calculation by difference between the feedback of that be controlled and the inverter PID given.
Fb.00
PID give signal source
Setting range: 0-8 Factory
set: 0
Use to set the input channel of PID controller given signal.
0: Keyboard number given PID Decided by
[Fb.01]
setting.
1: Keyboard potentiometer
2: Terminal VS1 voltage analog
3: Terminal VS2 voltage analog
4: Terminal AS current analog
5: Terminal PUL pulse signal
X5 state
X6 state
X7 state
X8 state
X4 state
X3 state
X2 state
input terminal off
input terminal on
X1 state
Reserved
TA TB
Y2 state
Y1 state
TC state
Reserved
Reserved
Reserved
Reserved
output terminal on
output terminal off
