TL1 Reference
Set Commands
388
TSG-3800 User’s Guide
12778474-002-2 Revision F – March 2004
Set User
The Set User command allows an administrative-level user to add, modify, and
delete user accounts. To add a user, you must specify username, password, and
level (default level is 1). To delete a user, you need only specify a username. To
erase the entire list of users except Guest- and Administrator-level users, specify
Init.
When the TSG-3800 successfully receives the command, it returns the COMPLD
message. If the TSG-3800 does not successfully receive the command, it returns
the DENY message.
Example Command
SET-PRMTR-REF:TSG3800::ctag::BEST;
Example Response
TSG3800 02-09-11 09:57:12
M 658 COMPLD
;
Command Syntax
SET-USER:tid::ctag::mode[,username]
[,password][,level];
Valid aid
none
mode = Add, Del, Init
username = up to 20 characters, required for
Add, Del
password = up to 20 characters, required for Add
level = 0 (guest), 1 (user), 2 (craft), 3 (supervisor), 4
(administrator) Default =1
Minimum User Level
4
Example Command
SET-USER:TSG3800::ctag::ADD,DSTREBE,ADMIN,4;
Example Response
TSG3800 02-09-11 10:01:17
M 660 COMPLD
;
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com