Sanken SVCO6 Скачать руководство пользователя страница 67

Страница: 67 / 326

- 65 -

ap
ter
6

6. Operation



Wiring shall not be made after connecting to power supply.

Failure to observe this warning may result in personal injury, fire or electric shock.



Before undertaking the work, safety notes must be checked.

Failure to observe this warning may result in personal injury or fire.



Grounding of the inverter and motor must be carefully implemented.

Failure to observe this warning may result in electric shock or fire.



Please install the cover of the inverter before connecting the power.

Do not remove the cover when it is powered on.



Works such as maintenance inspection and replacement of parts etc. can only be carried out by

professional maintenance personnel.

Failure to observe this warning may result in electric shock or personal injury.

Содержание SVCO6







































































































































































































































































































































Результаты поиска

Содержание SVCO6

Отзывы:

Sanken SVCO6, Инструкция по эксплуатации, Страница: 67 / 326

Результаты поиска

Содержание SVCO6

Отзывы: