Sanken SVCO6, Инструкция по эксплуатации, Страница: 10 / 326

- 8 -
1
–6
Notes on Operation
1-6 Notes on Operation
Danger

Attach the front cover before turning the power on.
And, do not remove the front cover when the power is on.
Failure to observe this warning may result in electric shock.

Do not touch any switch with wet hands.
Failure to observe this warning may result in electric shock.

Do not touch any inverter terminal when the inverter is energized even if the motor is not
operating.
Failure to observe this warning may result in electric shock.

Do not get close to the machinery driven by the inverter after an alarm stop because it will
restart suddenly if the restart function is selected. (Design the system to ensure personal safety
at restart.)
Failure to observe this warning may result in personal injury.

Provide a separate emergency stop switch.
Failure to observe this warning may result in personal injury.

If alarm reset is done in the operation signal status, the equipment will restart suddenly.
Therefore, please cut off the operation signal before releasing an alarm.
Failure to observe this warning may result in personal injury.
Caution

Do not touch the radiator fins or DC reactor because they become very hot.
Failure to observe this warning may result in burns.

It is easy to set the inverter drive speed from low to high, so be sure to confirm the operating
range of the motor and machinery driven by the inverter before making such settings.
Failure to observe this warning may result in personal injury.

Please set separate brake if it is required to keep brake.
Failure to observe this warning may result in personal injury.

Do not start or stop the inverter by turning the main circuit ON or OFF.
Failure to observe this warning may result in equipment faults.