Sanken SVCO6, Инструкция по эксплуатации, Страница: 230 / 326

- 228 -
7-3 Description of Functions
F6002 Torque limiter analog input function
(power running)
The function to change the torque limiter values in power running status with the analog input command of control
circuit terminals VIF1, VIF2 and VIF3.
Code No. Function Name Date Content
Setting
Resolution
Factory
Presets
F6002 Torque limiter analog input
function (power running) 0: F6001
1: External analog VIF1 voltage (0-5V)
2: External analog VIF1 voltage (0-10V or potentiometer)
3: External analog VIF2 voltage (0-5V)
4: External analog VIF2 voltage (0-10V or potentiometer)
5: External analog VIF3 voltage (0-5V)
6: External analog VIF3 voltage (0-10V or potentiometer)
7: External analog VIF1 current (4
-
20mA)
8: External analog VIF2 current (4
-
20mA)
9: External analog VIF3 current (4
-
20mA)
1 0
● When F6002=0, the torque limiter during power running will use the value set by F6001.
● When F6002=1, 3, 5, the torque limiter values in power running status are determined by input values of control
circuit terminals VIF1, VIF2 and VIF3 (0-5V).
● When F6002=2, 4, 6, the torque limiter values in power running status are determined by input values of control
circuit terminals VIF1, VIF2 and VIF3 (0-10V) or potentiometer.
● When F6002=7, 8, 9, the torque limiter values in power running status are determined by input values of control
circuit terminals VIF1, VIF2 and VIF3 (4-20mA).
Heavy overload: 200%
Light overload: 150%
Torque limiter
(power running)
Input value of control circuit terminals
VIF1, VIF2 & VIF3
Note 1: For torque limiter (power running) values corresponding to control circuit terminal input signal, the change
range of mode A is 0-200%, the change range of mode B is 0-150%.
Note 2: This function is effective only when selected by the speed control of vector control (F1001=2 or 3).
Reference parameter
F1001 (motor control mode selection)
F6001 (torque limiter (power running))