Sanken SVCO6, Инструкция по эксплуатации, Страница: 305 / 326

- 303 -
-
303
-
第
10
章
C
h
ap
ter
1
0
10-3 Part Replacement
（
2
）
Steps for replacing fan of SVC06-0110
~
0150
The fan is on the top of the device.
Step 1 Remove two screws (M3).
Step 2 Hook the cover board with a finger and pull to remove it.
Step 3 Pull out the fan and remove the connector, then make a replacement.
After the replacement, reinstall the fan with a sequence of 3 →2→ 1.
Hook here with a finger
M3 screw
Cover board
Fan
Connector
Direction of wind
Figure 10-2 Replacement steps of fan (SVC06-0110
~
0150)
（
3
）
Steps for replacing fan of SVC06-0185
~
0300
The fan is on the top of the device.
Step 1 Remove four screws (M4×8).
Step 2 Pull out the cover board with a finger.
Step 3 Remove four screws (M4×45).
Step 4 Pull out the fan and remove the connector, then make a replacement.
After the replacement, reinstall the fan with a sequence of 4
→ 3 →2→ 1.
Figure 10-3 Replacement steps of fan (SVC06-0185 ~ 0300)
Direction of wind
M4×8 screw
Cover board
M4×45 screw
Fan
Connector