Sanken SVCO6, Инструкция по эксплуатации, Страница: 105 / 326

- 103 -
-
103
-
C
h
ap
ter
7
7-3 Description of Functions
7-3 Description of Functions
Basic functions
F1001 Motor control mode selection
A function for selecting motor control mode.
Code No. Function Name Data Content Setting Resolution Factory
Presets
F1001 Motor control mode
selection
1: V/f control mode
2: Speed control (speed sensorless vector
control)
3: Speed control (speed sensor vector control)
4: Torque control (speed sensorless vector
control)
5: Torque control (speed sensor vector control)
6: Position control (speed sensor vector control)
10: Auto tuning mode 1
11: Auto tuning mode 2
40: V
・
f separation control
1 1

F1001 = 1: the motor is controlled by the V/f graph set in V/f mode.

F1001 = 2: Speed control mode (speed sensorless vector control), F1001 = 3: Speed control mode (speed sensor
vector control).
Speed control is a control mode that will maintain a constant speed regardless of what the load condition is. And, it is
a control mode which allows the motor to generate high torque from the low-frequency field. In speed control, you
can select speed sensorless vector control (F1001 = 2) or speed sensor vector control (F1001 = 3). The figure below
shows the setting flow through which the vector speed control is realized.
( Related function codes)

To carry out speed control mode selection, please refer to description of relevant parts of function code F6000.

To carry out speed sensor vector control mode selection, please refer to description of relevant parts of function code
F8100 for basic setting of PG sensor.
Speed sensorless vector control
(F1001=2)
Setting motor parameters
(F5001)
Motor parameter auto
tuning
(F1001=10 or 11)
Setting of torque limiter
Setting of starting o braking
excitation
Setting of speed control gain
Test run
Speed sensor vector control
(F1001=3)
Setting motor parameters
(F5001)
Basic setting of PG sensor
F8100-related