Sanken SVCO6, Инструкция по эксплуатации, Страница: 231 / 326

- 229 -
-
229
-
C
h
ap
ter
7
7-3 Description of Functions
F6004 Torque limiter analog input function
(
regeneration )
The function to change the torque limiter values in regenerated status with the analog input command of control circuit
terminals VIF1, VIF2 and VIF3.
Code No. Function Name Date Content
Setting
Resolution
Factory
Presets
F6004 Torque limiter analog input
function (regeneration) 0: F6003
1: External analog VIF1 voltage (0-5V)
2: External analog VIF1 voltage (0-10V or potentiometer)
3: External analog VIF2 voltage (0-5V)
4: External analog VIF2 voltage (0-10V or potentiometer)
5: External analog VIF3 voltage (0-5V)
6: External analog VIF3 voltage (0-10V or potentiometer)
7: External analog VIF1 current (4
-
20mA)
8: External analog VIF2 current (4
-
20mA)
9: External analog VIF3 current (4
-
20mA)
1 0
● When F6004=0, the torque limiter during regeneration will use the value set by F6003.
● When F6004=1, 3, 5, the torque limiter values in regenerated status are set by input values of control circuit
terminals VIF1, VIF2 and VIF3 (0-5V).
● When F6004=2, 4, 6, the torque limiter values in regenerated status are set by input values of control circuit
terminals VIF1, VIF2 and VIF3 (0-10V) or potentiometer.
● When F6004=7, 8, 9, the torque limiter values in regenerated status are set by input values of control circuit
terminals VIF1, VIF2 and VIF3 (4-20mA).
Torque limiter
(regeneration)
Input value of control circuit terminals VIF1, VIF2 & VIF3
Note 1: For torque limiter (regeneration) values corresponding to control circuit terminal input signal, the change range
of mode A is 0-200%, the change range of mode B is 0-150%.
Note 2: This function is effective only when selected by the speed control of vector control (F1001=2 or 3).
Reference parameter
F1001 (motor control mode selection)
F6003 (torque limiter (regeneration))
Heavy overload: 200%
Light overload: 150%