Sanken SVCO6 Скачать руководство пользователя страница 179

Страница: 179 / 326

- 177 -

177

ap
ter
7

7-3

Description of Functions

F1805

Reading alarm data

The function to read the five alarms stored by time sequence.

Code No.

Function Name

Data Content

Setting

Resolution

Factory Presets

F1805

Reading alarm data

0: No function

1: Read start

9: Record erase

●

The function to read the alarms displayed on the inverter. Read the last five alarms.

●

In case that the alarm will not be recorded, it will display ―

‖ when F1805=1 is set.

●

The record will be erased when F1805=9. Meanwhile, the data of F1806

F1810 will also be erased.

●

Please refer to ―5-5-4 Reading operations of alarm data‖ for details.

Note

This code cannot be written with the communication function; otherwise, the undefined response will be replied.

F1806

Alarm status confirmation 1

F1807

Alarm status confirmation 2

F1808

Alarm status confirmation 3

F1809

Alarm status confirmation 4

F1810

Alarm status confirmation 5

The function of the inverter to read output frequency, output current and other data when the alarm stops.

Code No.

Function Name

Data Content

Setting

Resolution

Factory

Presets

F1806

F1807

F1808

F1809

F1810

Alarm status confirmation 1

Alarm status confirmation 2

Alarm status confirmation 3

Alarm status confirmation 4

Alarm status confirmation 5

Inverter status in case of an alarm

(alarm name, output frequency, output

current, output voltage, DC voltage, output

power, radiator fin temperature)

—

●

This is a read only function code.

●

In case that the alarm will not be recorded, it will display ―

‖.

●

When F1805=9 is set, the data recorded in F1806

F1810 will be erased.

●

Please refer to ―5-5-5 Alarm status confirmation operation‖ for detailed operation method and display content.

Note

This code cannot be written with the communication function; otherwise, the undefined response will be replied.

Note

The motor parameters will automatically test the alarm status in 1 and 2, but only the alarm name will be displayed,

other status will be displayed as 0 and will not be recorded.

Содержание SVCO6







































































































































































































































































































































Результаты поиска

Содержание SVCO6

Отзывы:

Sanken SVCO6, Инструкция по эксплуатации, Страница: 179 / 326

Результаты поиска

Содержание SVCO6

Отзывы: