![background image](http://html.mh-extra.com/html/omron/sysmac-cp-series/sysmac-cp-series_user-manual_742262524.webp)
Appendices
A-64
CP2E CPU Unit Software User’s Manual(W614)
A202
00 to
07
Communications Port
Enabled Flags
ON when a communication instruction
(SEND, RECV, or CMND) can be
executed with the corresponding port
number.
Each bit corresponds to a
communication port number.
Bits 00 to 07 correspond to
communications ports 0 to 7.
ON: Network
communication
is not being
executed
OFF: Network
communication
is being
executed
---
Cleared
•
Refreshed
when com-
munications
finished.
•
Refreshed
when
instruction is
executed.
15
Network
Communications Port
Allocation Enabled
Flag
ON when a communication instruction
(SEND, RECV, or CMND) can be
executed with the automatic allocation
function.
ON: Communication
port available
OFF: Communication
port not
available
---
A20
3
to A210
---
Network
Communications
Completion Codes
A response code is stored when a
network communication instruction
(SEND, RECV, or CMND) is executed.
Each word corresponds to a port
number.
Words A20
3
to A210 correspond to
communications ports 0 to 7.
Except 0000:
Error code
0000:
Normal condition
---
Cleared
Refreshed
when
instruction is
executed.
A214
00 to
07
First Cycle Flags after
Network
Communications
Finished
Each flag will turn ON for just one cycle
when a communications instruction is
executed using automatic
communication port allocations. Each
bit 00 to 07 corresponds to
communication port 0 to 7.
ON: First cycle after
communications
finish only
OFF: Other status
---
Cleared
Refreshed
when commu-
nications fin-
ished.
A215
00 to
07
First Cycle Flags after
Network
Communications Error
Each flag will turn ON for just one cycle
when a communications instruction is
executed using automatic
communication port allocations and an
error occurs at the end of
communication.
Each bit 00 to 07 corresponds to
communication port 0 to 7.
If the flag is 1 (ON), please identify the
cause of error refer to the network
communication response code (A20
3
to A210).
ON: First cycle after
communications
error only
OFF: Other status
---
Cleared
Refreshed
when commu-
nications fin-
ished.
A216
to A217
---
Network
Communications
Completion Code
Storage Address
The communication response code is
stored and automatically set to any
channel address of the auxiliary relay
when a communications instruction is
executed using automatic
communication port allocations.
---
Cleared
Refreshed
when
instruction is
executed.
A21
8
---
Used Communications
Port Numbers
Stores the communications port
numbers used when a communications
instruction is executed using automatic
communication port allocations.
0000 to 0007 hex:
Communications port
0 to 7
---
Cleared Refreshed
when
instruction is
executed
A219
00 to
07
Network
Communications Error
Flags
ON when an error occurred during
execution of a network instruction
(SEND, RECV, CMND, or PMCR).
Bits 00 to 07 correspond to
communications ports 0 to 7.
ON: Error occurred
OFF: Normal
condition
---
Cleared Refreshed
when
instruction is
executed
A262
to A26
3
---
Maximum Cycle Time
These words contain the maximum
cycle time since the start of PLC
operation. The cycle time is recorded in
3
2-bit binary. The upper digits are in
A26
3
and the lower digits are in A262.
0 to FFFFFFFF:
0 to 429,496,729.5
ms
(0.1-ms units)
Cleared
Cleared
Refreshed
when updating
the maximum
cycle time.
A264
to A265
---
Present Cycle Time
These words contain the present cycle
time. The cycle time is recorded in
3
2-bit binary. The upper digits are in
A265 and the lower digits are in A264.
0 to FFFFFFFF:
0 to 429,496,729.5 ms
(0.1-ms units)
Cleared
Cleared
Refreshed
each cycle
during the
overseeing
processes.
Address
Name
Function
Settings
Status
after
mode
change
Status at
startup
Write
timing
Related
flags,
settings
Words
Bits
Содержание SYSMAC CP Series
