Omron SYSMAC CP Series, Руководство пользователя

Страница: 173 / 578

11-3
11 High-speed Counters
CP2E CPU Unit Software User’s Manual(W614)
11
-1 Over
vie
w
11
1
1-1-2
Flo
w
of Oper
ation
Precautions for Correct Use Precautions for Correct Use
A built-in input cannot be used as a normal input, interrupt input, or quick-response input if it is
being used as a high-speed counter input. Refer to
8 - 3 - 3 Allocating Built-in Input Terminal s for
details.
Click the Built-in Input Tab and select the
Use high speed counter
Check Box for high-speed counters
0 to 5. Set the counting mode, reset method, and input setting.
11-1-2 Flow of Operation
1
• Enable the required high-speed counters.
• Select the U s e high s peed counter Check Box for high-
speed counters 0 to 5. Set the input setting, counting
mode and reset method on the Built-in Input Tab Page of
the PLC Setup using the CX-Programmer.
• Terminals 00 to 06 on the CIO 0 terminal block can be
used for high-speed counters. High-speed counters 0 to
5 correspond to terminals 00 to 06.
2
• Read the PV from Auxiliary Area or by executing a PRV
instruction.
• Execute a PRV instruction.
PLC Setup
PLC Set u p
Read co u nter PV
Create
ladder
program
Read co u nter fre qu ency