Omron SYSMAC CP Series, Руководство пользователя

Страница: 155 / 578

9 Quick-response Inputs
9-3
CP2E CPU Unit Software User’s Manual(W614)
9
-1 Quic
k-resp
ons
e Inp
u
ts
9
9-1-2 Flo
w of
Operation
Precautions for Correct Use Precautions for Correct Use
A built-in input cannot be used as a quick-response input if it is being used as a normal input,
interrupt input, or high-speed counter input. Refer to
8 - 3 - 3 Allocating Built-in Input Terminal s for
details.
Click the Built-in Input Tab and select
Quick
in the interrupt input settings.
Built-in Input Tab Page
9-1-2 Flow of Operation
1
• Set IN2 to IN9 for quick-response inputs on the Built-in Input
Tab Page of the PLC Setup using the CX-Programmer.
• The terminals 02 to 09 of CIO 0 can be used for quick-
response inputs. Bits CIO 0.02 to CIO 0.09 correspond to ter-
minals 02 to 09.
2
Read the status of CIO 0.02 to CIO 0.09 using the LD instruction
or other instructions.
PLC Setup
Quick-response input setting Corresponding bit address
IN2 Select Quick for IN2
to IN9.
CIO 0.02
IN 3 CIO 0.0 3
IN4 CIO 0.04
IN5 CIO 0.05
IN6 CIO 0.06
IN7 CIO 0.07
IN 8 CIO 0.0 8
IN9 CIO 0.09
PLC Set u p
Create ladder
program
Cyclic task or
interr
u pt task
S elect Q u ick