Omron SYSMAC CP Series, Руководство пользователя

Страница: 147 / 578

8-3
8 Overview of Built-in Functions and Allocations
CP2E CPU Unit Software User’s Manual(W614)
8-2 Overall Pr
oce
dure f
o
r U
sing
CP2E Buil
t-in
Fu
nctions
8
8-2 Overall Procedure for Using CP2E
Built-in Functions
The overall procedure for using built-in CP2E functions is described in this section.
1
Select the functions to use.
Example: Interrupts, high-speed counter
inputs, and pulse outputs.
2
Set the functions with the applicable numbers
using the CX-Programmer.
Example: Using input interrupt IN 3 and high-
speed counter 0, parameters in the
PLC Setup must be set for the fol-
lowing functions.
Refer to Section 7
PLC Setup and 8 - 3
Terminal Alloca-
tion
s for Built-in
Function s .
• Input interrupts
• Quick-response inputs
• High-speed counters
• Origin searches
• Minimum cycle time
• Serial communications
• Ethernet
• Analog Option Board
3
Write ladder diagrams using the CX-Pro-
grammer.
Example: Permitting interrupts with the
MSKS instruction and program-
ming high-speed counters with the
CTBL instruction.
Example: Stopping high-speed counters.
Refer to A-2 Auxil-
iary Area Allocation s
by Addre ss .
Example: Reading the present value of a
high-speed counter.
4
Transfer the PLC Setup and ladder program
from the CX-Programmer to the CP2E CPU
Unit.
5
Once turn OFF the power supply to the CP2E
CPU Unit, then turn ON again.
6
Start the CP2E CPU Unit operation.
Select F u nctions
Make the Settings in
the PLC Set
u p
Special Instr u ctions
W riting Related
A u xiliary Area W ords
Reading Related
A
u xiliary Area W ords
Create Ladder Program
Transfer PLC Set u p
and Ladder Program
Re s t a rt the CP2E
Start Operation