![background image](http://html.mh-extra.com/html/omron/sysmac-cp-series/sysmac-cp-series_user-manual_742262420.webp)
17 Analog Input/Output Option Board
17-14
CP2E CPU Unit Software User’s Manual(W614)
z
Terminal Wiring
When wiring the analog I/O terminal block, treat either solid or stranded wires directly.
•
To make the connection, press the release button in with a small flat blade screwdriver and push
the line in while the lock is released. Remove the screwdriver and lock it inside.
•
To disconnect the wiring, press the release button in with a small flat blade screwdriver and pull
the line out while the lock is released.
Note 1
Ferrules without plastic sleeve cannot be used.
2
When using stranded wire, twist the core so that the barbed wires cannot protrude.
3
Do not solder-plate the end of cable.
The screwdriver shown below is recommended for wiring.
To prevent noise, 2-core shielded twisted-pair cable should be used.
Note 1
Separate wiring from power lines (AC power supply lines, high-voltage lines, etc.)
2
When there is noise in the power supply line, install a noise filter on the input section and the power supply.
3
When external power is supplied, or when the power is interrupted, there may be a pulse status analog
output of up to 1 ms. If this status is a problem, take the following measures.
•
Turn ON the power to the CP2E N
-type CPU Unit, check the operation status, and then turn ON the
power at the load.
•
Turn OFF the power to the load and then turn OFF the power to the CP2E N
-type CPU Unit.
Model
Manufacturer
SZS 0.4
×
2.5
Phoenix Contact
Wiring for Analog Outputs
Release
bu
tton
2-cond
u
ctor shielded
t
w
isted-pair ca
b
le
0.4mm
Side
Front
2.5mm
COM
V OUT
Analog
o
u
tp
u
t
option
b
oard
Analog
de
v
ice
w
ith
v
oltage
inp
u
t
FG
2-core shielded
t
w
isted-pair ca
b
le
+
−
Содержание SYSMAC CP Series
