Omron SYSMAC CP Series, Руководство пользователя

Страница: 340 / 578

15 Ethernet
15-10
CP2E CPU Unit Software User’s Manual(W614)
15-3 Basic Setting for Ethernet
Note 1 The local IP address and other parameters can be set from the CX-Programmer.
2 It is not necessary step, and the CX-Integrator version 2.67 or higher (CX-One version 4.51 or higher) is
required.
When the FINS communications service is used, routing tables must be created in advance. Routing
tables are required in the following circumstances.
• When communicating with a PLC or computer on another network (e.g. remote programming or monitor-
ing using FINS message or a CX-programmer)
• When routing tables are used for one or more other nodes on the same network
15-3-1 Overview of Startup Procedure
Determine the loc a l IP a ddre ss
a nd a ddre ss conver s ion method.
Refer to Ethernet Units Constr u ction of Networks Oper a tion M a n ua l for C S /CJ S eries
(C a t. No. W420) S ECTION 5 Determining IP Addresses .
Refer to CP2E CPU Unit H a rdw a re User’s M a n ua l (C a t. No. W613) A-4 Network
Inst a ll a tion.
Connect to the network
us ing twi s ted-p a ir c ab le.
Cre a te the ro u ting t ab le s .
Perform PLC s et u p.
(Cre a te IP ro u ter t ab le s .)
T u rn ON power to the CPU Unit.
( S ee note 1.)
( S ee note 2.)
S et the IP a ddre ss freely with the
CX-Progr a mmer.
Connecting to the CPU Unit
witho
u t m a king a ny s etting s .
U s e au to connection method or
the def au lt IP a ddre ss .
Refer to 15-3-3 B a sic S ettings.
Refer to Ethernet Units Constr u ction of Networks Oper a tion M a n ua l for C S /CJ S eries
(C a t. No. W420) 6-4 Cre a ting Ro u ting T ab les.
Refer to 15-3-3 B a sic S ettings.