NEC POWERMATE PROFESSIONAL 9000 - SERVICE, Руководство пользователя

Страница: 92 / 305

Using Tools and Utilities 4-15

Base I/O address
Available addresses include “378h” (the default),
“228h,” “278h,” and “3BC.”

Interrupt
Available IRQs include “IRQ7” (the default) and
“IRQ5.”
NOTE
An interrupt set to IRQ5 in a multimedia
system might conflict with the audio subsystem
settings.

DMA Channel
Available DMA settings include “DMA 3” (the
default), and “DMA 1.” The DMA field is only
displayed when the Mode field is set to “ECP.”
„
Floppy Disk Controller
This field enables the diskette drive interface connector
on the riser board. Choices include “Enabled” (the
default) or “Disabled.”
„
IDE Controller
The IDE Controller field enables the IDE interface
connectors on the riser board. Choices include “Both”
(default), “Primary,” “Secondary,” and “Disabled.”
„
Audio
This field (“Enabled” by default) enables the audio
system on the system board. Choose “Disabled” if an
audio board is installed.
„
Hardware Monitor
This field (“Enabled” by default) enables the hardware
monitor device.