Lucent Technologies OptiStar EdgeSwitch, Руководство пользователя

Страница: 256 / 330

6 - 7 8
Lucent Technologies
365-575-925R1.5
Issue 1, April 2002
6.5.2.1 General Description
The
system – Access system diagnostics
menu item enables the user to reset certain FCIP Network Module
settings to the factory defaults. The Ethernet LED mode options under this sub menu are not supported on the
OptiStar EdgeSwitch. When this menu item is selected, the current Ethernet LED Mode will be displayed,
followed by the
diagnostics/system
sub menu.
Example:
Ethernet LED Mode : rx
6.5.2.2 Show System Diagnostics
Menu Path:
5) diagnostics
→
2) system
→
2) show
Shortcut Command:
At the root menu, type
diagnostics system show
Description:
This menu item shows the current Ethernet LED Mode.
Note :
The
Ethernet LED Mode
function is not
supported on the OptiStar EdgeSwitch.
Example:
Ethernet LED Mode : rx
In this example, the Ethernet LED behavior mode is set to receive.
6.5.2.3 Select Ethernet LED Behavior
Menu Path:
5) diagnostics
→
2) system
→
3) ethled
Shortcut Command:
At the root menu, type
diagnostics system ethled
Description:
This menu item is not supported on the OptiStar EdgeSwitch.