Lucent Technologies OptiStar EdgeSwitch, Руководство пользователя

Страница: 229 / 330

Detailed FCIP Network Module CLI Reference Guide
365-575-925R1.5
Lucent Technologies
6 - 5 1
Issue 1, April 2002
When menu item
3) console - Set console mode
is selected, the following sub menu will be displayed:
config/com/console
menu
1)
back
2)
show - Show current console settings (For help, go to Section 6.1.8.3.2 on page 6-51 )
3)
mode - Set console mode (For help, go to Section 6.1.8.3.3 on page 6-51 )
Enter a number from the
config/com/console
menu to go to the corresponding category.
6.1.8.3.1 General Description
The
console – Set console mode
menu item is not supported on the OptiStar EdgeSwitch.
Example
:
Power up console mode: Command
Note : This parameter determines the power-on mode of the serial port. Changing this parameter
may affect the user’s ability to manage the device through the serial port using the Command Line
Interface.
6.1.8.3.2 Show Current Console Settings
Menu Path:
1) config
→
8) com
→
3) console
→
2) show
Shortcut Command:
At the root menu, type
config com console show
Description
When this menu item is selected, the current
Power up console mode
for the FCIP Network Module will be
displayed. In the following example, the console mode is set to
Command
.
Example
:
The following is the switch console attributes menu for the configuration choice.
Power up console mode: Command
6.1.8.3.3 Set Console Mode
Menu Path:
1) config
→
8) com
→
3) console
→
3) mode
Shortcut Command:
At the root menu, type
config com console mode #,
where
#
is the number representing the Console Mode (see
available options in the Description section below).