Lucent Technologies OptiStar EdgeSwitch, Руководство пользователя

Страница: 183 / 330

Detailed FCIP Network Module CLI Reference Guide
365-575-925R1.5
Lucent Technologies
6 - 5
Issue 1, April 2002
Description
When this menu item is selected, the Event Log will be displayed. The events are shown one screen at a time.
Approximately 20 events are displayed on each screen. The last sets of events are displayed for view. At the
prompt, the user can exit the screen back to the menu with a “
0
”, display all the events with an “
a
” or display the
next screen at a time with a “<CR>”.
Example:
Event log messages
### Sev Date & Time Description
--- --- -------------- ----------------
5338 5 10/23/2000 10:03:05 [126] Restarted Port 1
5339 5 10/23/2000 10:03:07 [126] Restarted Port 1
5340 4 10/23/2000 10:03:07 [122] F_Port 1, Port 1, linkdown
5341 5 10/23/2000 10:03:08 [126] Restarted Port 1
5342 5 10/23/2000 10:03:10 [126] Restarted Port 1
5343 4 10/23/2000 10:03:10 [122] F_Port 1, Port 1, linkdown
5344 5 10/23/2000 10:03:11 [126] Restarted Port 1
5345 5 10/23/2000 10:03:14 [126] Restarted Port 1
5346 4 10/23/2000 10:03:14 [122] F_Port 1, Port 1, linkdown
5347 5 10/23/2000 10:03:15 [126] Restarted Port 1
5348 5 10/23/2000 10:03:17 [126] Restarted Port 1
5349 4 10/23/2000 10:03:17 [122] F_Port 1, Port 1, linkdown
5350 5 10/23/2000 10:03:18 [126] Restarted Port 1
5351 5 10/23/2000 10:03:20 [126] Restarted Port 1
5352 4 10/23/2000 10:03:20 [122] F_Port 1, Port 1, linkdown
5353 5 10/23/2000 10:03:21 [126] Restarted Port 1
5354 5 10/23/2000 10:03:23 [126] Restarted Port 1
5355 4 10/23/2000 10:03:23 [122] F_Port 1, Port 1, linkdown
5356 5 10/23/2000 10:03:25 [126] Restarted Port 1
5357 5 10/23/2000 10:03:27 [126] Restarted Port 1
(
Enter '0' to exit, 'a' for all, or <CR> to continue
)
(show/events)>0
The Event Log displays messages generated from the FCIP Network Module that include Storage Area Network
(SAN) and device status changes, device configurations. Status changes include reconfigurations (such as
assigning an address to a port) and health (such as a device entering a non-functional state). The event log also
displays certain events that are not logged by the device (and thus not included in the Device Events window),
such as a power-off, the removal of a managed device, or the causes of a loop down condition.
CLI
displays the following columns for device events.
•
###
- the column assigns a number showing relative sequence in which the event message was recorded
•
Sev
– this column identifies the severity level of the event, as assigned by the vendor (see the above list for
the possible severity levels and their descriptions)
•
Description –
this column contains the Ref number (in brackets), which is the vendor’s or MIB’s unique
identification of this event string , followed by the event description.