Lucent Technologies OptiStar EdgeSwitch, Руководство пользователя

Страница: 231 / 330

Detailed FCIP Network Module CLI Reference Guide
365-575-925R1.5
Lucent Technologies
6 - 5 3
Issue 1, April 2002
When this menu item is selected, the current Ethernet parameters will be displayed, followed by the
config/com/Ethernet
sub menu.
Example:
IP Address : 192.168.11.72
Netmask : 192.168.11.0
Default Gateway : 192.168.11.253
6.1.8.4.2 Show Current Ethernet Settings
Menu Path:
1) config
→
8) com
→
4) Ethernet
→
2) show
Shortcut Command:
At the root menu, type
config com Ethernet show
Description
When this menu item is selected, the current Ethernet settings will be displayed.
Example
:
IP Address : 192.168.11.72
Netmask : 192.168.11.0
Default Gateway : 192.168.11.253
The Netmask expresses the network attributes. In this example, 192.168.11.x identifies this as a class C address.
Therefore the Network part of the IP address is 192.168.11 and the node is 73. The Default gateway Network
portion must equal the network portion of the IP address.
6.1.8.4.3 Set Ethernet Address
Menu Path:
1) config
→
8) com
→
4) Ethernet
→
3) address
Shortcut Command:
At the root menu, type
config com Ethernet address x.x.x.x
, where
x.x.x.x
is the desired Ethernet address
Description
This menu item enables the user to change the Ethernet Address for the switch. The default IP address for the
switch is 192.168.1.129. If the user is installing more that one switch, each switch must have a separate Ethernet
address. The user must set the Ethernet address to be able to later configure the switch through the CLI. When
this menu item is selected, the current IP address is displayed in brackets.
Note:
Changes to this parameter will take affect on next reset
IP Address [192.168.11.73] =