OptiStar EdgeSwitch Configuration
365-575-925R1.5
Lucent Technologies
4 - 4 3
Issue 1, April 2002
Using the CLI to configure OptiStar EdgeSwitch A, add the remote FCIP Network Module with the
following FCIP Network Module IP address and subnet mask from OptiStar EdgeSwitch B:
FCIP Network Module IP Address
Subnet Mask
192.168.19.2
255.255.255.0
Next, using the CLI to configure OptiStar EdgeSwitch B, add the remote FCIP Network Module with
the following FCIP Network Module IP address and subnet mask from OptiStar EdgeSwitch A:
FCIP Network Module IP address
Subnet Mask
192.168.5.1
255.255.255.0
Step 4
Set up Routing using Static Routes
In this example, routing will be set up via static route entry for each OptiStar EdgeSwitch as follows:
To set the static route for OptiStar EdgeSwitch A, from the main menu follow the path:
[3] Configuration
→
→
→
→
[6] Routing Configuration
→
→
→
→
[1] Set Static Route
Use the following parameters to set the static route:
Destination IP:
192.168.19.2
Subnet Mask:
255.255.255.0
For this switch the remote FCIP Network Module IP address is the one belonging to the FCIP
Network Module in OptiStar EdgeSwitch B (192.168.19.2).
Gateway (next hop): 192.168.3.200
Since we are doing the tunnel through the Gigabit Ethernet Network Module, the Gateway IP address
should be the corresponding interface IP address on port 6 of the Gigabit Ethernet Network Module
on OptiStar EdgeSwitch B (192.168.3.200).
To set the static route for OptiStar EdgeSwitch B use the following parameters:
Destination IP:
192.168.5.1
Subnet Mask:
255.255.255.0
For this switch the remote FCIP Network Module IP address is the one belonging to the FCIP
Network Module in OptiStar EdgeSwitch A (192.168.5.1).
Gateway (next hop): 192.168.3.100
Since we are doing the tunnel through the Gigabit Ethernet Network Module, the Gateway IP address
should be the corresponding interface IP address on port 1 of the Gigabit Ethernet Network Module
on OptiStar EdgeSwitch A (192.168.3.100).
Содержание OptiStar EdgeSwitch
