Lucent Technologies OptiStar EdgeSwitch, Руководство пользователя

Страница: 226 / 330

6 - 4 8
Lucent Technologies
365-575-925R1.5
Issue 1, April 2002
Once you have selected this menu item, at the prompt, enter the old password (if this password has not been
previously changed, it will be the default password ‘
monitor
’).
At the next prompt, enter the new password, then re-enter the new password when prompted. Press the
<Enter>
key.
(
Note :
Once you have changed the password, the new password will be required to change this password again.)
If you are done making changes to the FCIP Network Module using the CLI, type
Exit
then select the
<Enter>
key to close the session. For the password change to take effect, the FCIP Network Module must be reset. Please
see Section 4.8.5, entitled “How to Reset an FCIP Network Module” for help.
6.1.6.3 Set Monitor / Manage Password
Menu Path:
1) config
→
6) password
→
3) manage
Shortcut Command:
At the root menu, type
config password manage
Description
The FCIP Network Module comes configured with two default user passwords. The first password ‘
monitor
’
allows a user read-only access to view system configuration settings. With this password the user cannot make
any changes to settings. The second password ‘
manage
’ allows a user read-write access to view and/or modify
system configuration settings. For security reasons, it is highly recommended that the customer change these
passwords from the default values to new passwords as soon as possible. Note that the menu items under the
Password menu have the same names as the default passwords (
monitor
and
manage
). Also, ensure that you
change the passwords from the default values on each FCIP Network Module. There is no method for changing
the passwords on all modules at once; each FCIP Network Module must be set individually. It is recommended
that you change the passwords on all of the FCIP Network Modules on the OptiStar EdgeSwitch, then perform a
reset of the OptiStar EdgeSwitch (
see Section 4.8.5 ) for the password changes to take effect.
This menu item enables the user to set the
manage
password. To set the
monitor
password, please refer to
Section 6.1.6.2 .
To change the ‘
manage
’ password, select:
3) Manage - Set Monitor/Manage password
At the prompt, enter the old password (if this password has not been previously changed, it will be the default
password ‘
manage
’).
At the next prompt, enter the new password, then re-enter the new password when prompted.
(
Note :
Once you have changed the password, the new password will be required to change this password again.)