Lucent Technologies OptiStar EdgeSwitch, Руководство пользователя

Страница: 110 / 330

4 - 4 8
Lucent Technologies
365-575-925R1.5
Issue 1, April 2002
you like, you can reactivate this Zone Set to update other switches on the fabric so that all switches have a
permanent record of the enforced Zone Set.
4.10.2 How to Configure & Activate WWN Zoning on the OptiStar EdgeSwitch
Step 1
Log on to the CLI at the management level for the FCIP Network Module for which you would like
to set up WWN zoning (
see Section 4.8.2, entitled “How to Access the CLI for an FCIP Network
Module” for help).
Step 2
From the FCIP Network Module CLI Root Menu,
select:
1) config
Æ Æ Æ Æ
3) zone
Æ Æ Æ Æ
3)wwn
Æ Æ Æ Æ
4)zoneset
-or-
From the FCIP Network Module CLI Root Menu, type:
config zone wwn zoneset
The
zoneset
menu will now be displayed:
Step 3
From the
zoneset
menu (config/zone/wwn/zoneset), create empty Zone Set(s):
add “ZoneSetName”
(where
ZoneSetName
is the name of the empty Zone Set)
Example
: (config/zone/wwn/zoneset)>add “Backup”
For additional help on the
zoneset
menu, see Section 6.1.3.3.4 .
Step 4
Add Zone(s) to the Zone Set, using either of the following methods:
Method 1
To create an empty Zone and add it to the earlier-created Zone Set:
Go to the zone menu (config/zone/wwn/zone) and type:
zadd “ZoneName” “ZoneSetName”
(where
ZoneName
is the name of the empty Zone and
ZoneSetName
is the name
of the Zone Set)
Example
: (config/zone/wwn/zone)>zadd “backupNT” “Backup”
Method 2
To select from Zones that were already created:
Go to the zoneset menu (config/zone/wwn/zoneset) and type:
define “ZoneSetName”
(where
“ZoneSetName”
is the name of the Zone Set)
Enter a “
Y
” for
yes
in the brackets for each zone to be added to the Zone Set.
Example
:
(config/zone/wwn/zoneset)>define “Backup”
(Enter 0 to exit)
backupNT [Y]:
For additional help on the
zone
menu, see Section 6.1.3.3.5 .