Lucent Technologies OptiStar EdgeSwitch, Руководство пользователя

Страница: 185 / 330

Detailed FCIP Network Module CLI Reference Guide
365-575-925R1.5
Lucent Technologies
6 - 7
Issue 1, April 2002
Description
There are nine Fault LED severity levels that can be selected. The Fault LED Severity is tripped by messages at
the set severity level or higher. The
Fault LED
is triggered over the following conditions
:
•
Internal FCIP Network Module failure – an internal failure was detected
•
Self test failure - The POST test failed and the system needs attention.
•
Incorrect configuration loaded
The nine possible levels are described as follows:
Fault LED Severity Levels Description
[0] emergency Immediate action required; system failing
[1] alert Unrecoverable condition reported; major event in progress
[2] critical Event failed with possible loss of integrity
[3] error Condition failed; action required
[4] warning Failed event occurred; no action required
[5] notify Configuration error or abnormal event occurred; no action required
[6] info Event occurred; no action required
[7] debug Internal message for development
[8] mark Message marker
The existing level is displayed in brackets at the prompt (in this example the severity level is set to
[2] critical
):
Fault LED Severity [2] =
Press the <
Enter
> key to keep the current setting, or enter a new setting after the equal sign, then press the
<
Enter
> key. The display will show OK, indicating the new setting has been accepted.
6.1.2.6 Clear Event Log
Menu Path:
1) config
→
2) event
→
6) clear_log
Shortcut Command:
At the root menu, type
config event clear_log
Description
This menu item allows the user to clear the current event log (i.e. delete all events messages that are stored on
the FCIP Network Module). The FCIP Network Module will continue to generate event messages as they occur.
Do you wish to continue (Yes / No): [
N
]
Press the <
Enter
> key to keep the event messages, or type a
Y
, then press the <
Enter
> key to clear the log.