Lucent Technologies OptiStar EdgeSwitch, Руководство пользователя

Страница: 259 / 330

Detailed FCIP Network Module CLI Reference Guide
365-575-925R1.5
Lucent Technologies
6 - 8 1
Issue 1, April 2002
6.5.3.3 Beacon Port
Menu Path:
5) diagnostics
→
3) port
→
3) beacon
Shortcut Command:
At the root menu, type
diagnostics port beacon
Description:
Beacon Port mode is used to flag a port by causing both LEDs on the port to flash. When Beacon Port mode is
enabled (set to
[2] on
), the current LED state is overridden with the Beacon Port signal (both LEDs flashing).
When this menu item is selected, the possible values are displayed.
[1] unknown
[2] on
[3] off
Beacon State [3] =
In this example, the Beacon State is set to off. Press the <
Enter
> key to keep the current setting, or enter a new
state after the equal sign, then press the <
Enter
> key. The display will show OK, indicating the new setting has
been accepted.
6.5.3.4 Reset Port
Menu Path:
5) diagnostics
→
3) port
→
4) reset
Shortcut Command:
At the root menu, type
diagnostics port reset
Description:
When this menu item is selected, the port is automatically reset.
The display will show OK, indicating the reset has taken place.
6.5.3.5 Send PLOG/PRLI to All Devices on Port
Menu Path:
5) diagnostics
→
3) port
→
5) prli
Shortcut Command:
At the root menu, type
diagnostics port prli