Lucent Technologies OptiStar EdgeSwitch, Руководство пользователя

Страница: 168 / 330

5 - 5 4
Lucent Technologies
365-575-925R1.5
Issue 1, April 2002
At the prompt, enter the number of the specific FCIP Network Module to which you would like to connect, then
enter the password. If a specific password has not been defined, the default password is ‘
manage
’. See Section
4.8.3 for help on setting passwords for the FCIP Network Module CLI.
You should now see the FCIP Network Module CLI Root Menu. Please see CHAPTER 6 for help on
performing specific functions.
Note :
The above menu item is not available via Web-based Management.
5.4.6 User Management
Menu Path:
[4] Administration
→
[6] User Management
Description:
The following 5 sections enable a user with Administration rights to perform various user management tasks.
5.4.6.1 Add User
Menu Path:
[4] Administration
→
[6] User Management
→
[1] Add User
Description:
This menu item enables any user in the system with
Administration
permission, including the system’s super
user, to add new users. A maximum of 8 users (not including the super user) may be assigned to the system at
any given time.
A new user is added to the system once the following information is entered:
Login UserName
Enter a login name that is a minimum of 6 and a maximum of 8 alpha-numeric
characters in length
User’s Password
Enter a temporary login password for the user that is a minimum of 6 and a maximum
of 8 alpha-numeric characters in length. The user should be instructed to change this
password to their own permanent login password once they access the system.
Contact Name
Enter a name that is a maximum of 16 alphanumeric characters.