Lucent Technologies OptiStar EdgeSwitch, Руководство пользователя

Страница: 140 / 330

5 - 2 6
Lucent Technologies
365-575-925R1.5
Issue 1, April 2002
5.3.3.3 Set Switching Port Parameters
Menu Path:
[3] Configuration
→
[3] Port Parameters
→
[3] Set Switching Port Parameters
→
Enter Module Number (1-4):
→
Enter Port Number (1-2):
Description:
When this menu item is selected, the following menu will be displayed. These menu items enable the user to set
and modify parameters for each switching port on the OptiStar EdgeSwitch.
Switching Port Parameters
F1 (Main Menu) F2 or .. (Previous Menu) F3 (Exit)
[1] Set Switching Port With Default Parameters (For help on this item, go to Section 5.3.3.3.1 on page 5-26 )
[2] Set Scrambling Mode (OC/STM only) (For help on this item, go to Section 5.3.3.3.2 on page 5-26 )
[3] Set Auto negotiation Mode (GbE only) (For help on this item, go to Section 5.3.3.3.3 on page 5-27 )
[4] Set Maximum Transmission Unit (For help on this item, go to Section 5.3.3.3.4 on page 5-27 )
[5] Set Maximum Receive Unit (For help on this item, go to Section 5.3.3.3.5 on page 5-28 )
[6] Set Framer Mode (OC/STM only) (For help on this item, go to Section 5.3.3.3.6 on page 5-28 )
[7] Set CRC Mode (OC/STM only) (For help on this item, go to Section 5.3.3.3.7 on page 5-29 )
Enter your Choice >
Enter a number from the Switching Port Parameters menu to go to the corresponding category. For sections
5.3.3.3.1 through 5.3.3.3.7, the OptiStar EdgeSwitch will need to be rebooted for the changes to take effect.
5.3.3.3.1 Set Switching Port with Default Parameters
Menu Path:
[3] Configuration
→
[3] Port Parameters
→
[3] Set Switching Port Parameters
→
Enter Module Number (1-4):
→
Enter Port Number (1-2):
→
[1] Set Switching Port with Default Parameters
Description:
When this menu item is selected, a screen will be displayed that shows the default parameters for the selected
switching port. The default parameters shown are based on the type of module (e.g. Gigabit Ethernet, FCIP, OC-
48c/STM-16c or OC-12c/STM-4c).
Enter
y
(yes) to configure the port with the default parameters.
5.3.3.3.2 Set Scrambling Mode for Switching Port
Menu Path:
[3] Configuration
→
[3] Port Parameters
→
[3] Set Switching Port Parameters
→
Enter Module Number (1-4):
→
Enter Port Number (1-2):
→
[2] Set Scrambling Mode