Lucent Technologies OptiStar EdgeSwitch, Руководство пользователя

Страница: 171 / 330

Detailed OptiStar EdgeSwitch CLI Reference Guide
365-575-925R1.5
Lucent Technologies
5 - 5 7
Issue 1, April 2002
5.5 Utilities
When this option is selected, the following sub menu will be displayed:
Utilities
F1 (Main Menu) F2 or .. (Previous Menu) F3 (Exit)
[1] Ping Utility (For help on this item, go to Section 5.5.1 on page 5-57 )
[2] BGP Debug (For help on this item, go to Section 5.5.2 on page 5-58 )
[3] OSPF Debug (For help on this item, go to Section 5.5.3 on page 5-59 )
[4] Local FCIP Network Module Domain
↔
IP Table (For help on this item, go to Section 5.5.4 on page 5-59 )
[5] Local FCIP Network Module State (For help on this item, go to Section 5.5.5 on page 5-60 )
[6] Clear EdgeSwitch Configuration (For help on this item, go to Section 5.5.6 on page 5-60 )
[7] Debug Mode Enable (For help on this item, go to Section 5.5.7 on page 5-61 )
[8] EdgeSwitch Configuration Import/Export (For help on this item, go to Section 5.5.8 on page 5-61 )
Enter your Choice >
Enter a number from the Utilities menu to go to the corresponding category.
5.5.1 Ping Utility
Menu Path:
[5] Utilities
→
[1] Ping Utility
Description:
When this option is selected from the
Utilities
menu, the following prompts will be displayed in succession:
Enter IP Address of the Host :
Enter the IP address of the host you would like to ping.
Do you want to ping with default values (y/n) :
If you entered
y
(yes) to the previous prompt, you should now see the following message, showing you the
default values:
Number of times to ping : 4
Size of ICMP Echo packet : 32
ICMP Echo Request interval in seconds : 2
ICMP Echo Request timeout in seconds : 30
Pinging with default values
If you entered
n
(no) to the previous prompt, you should now see the following prompts in succession:
Enter Number of times to ping (1-100) :
Enter Size of ICMP echo packet :
Enter ICMP echo request interval in seconds :
Enter ICMP echo reply timeout in seconds
: