Lucent Technologies OptiStar EdgeSwitch, Руководство пользователя

Страница: 225 / 330

Detailed FCIP Network Module CLI Reference Guide
365-575-925R1.5
Lucent Technologies
6 - 4 7
Issue 1, April 2002
6.1.6 Change Passwords
Menu Path:
1) config
→
6) password
Shortcut Command:
At the root menu, type
config password
Description
When menu item
6) password – Change passwords
is selected, the following sub menu will be displayed:
config/password
menu
1)
back
2)
monitor – Set monitor only password (For help, go to Section 6.1.6.2 on page 6-47 )
3)
manage – Set monitor / manage password (For help, go to Section 6.1.6.3 on page 6-48 )
Enter a number from the
config/password
menu to go to the corresponding category.
6.1.6.1 General Description
The
password – Change passwords
menu item enables the user to set passwords for both the
monitor
(read-
only) and
manage
(read-write) modes for the FCIP Network Module CLI. When this menu item is selected, the
config/password
sub menu will be displayed.
6.1.6.2 Set Monitor Only Password
Menu Path:
1) config
→
6) password
→
2) monitor
Shortcut Command:
At the root menu, type
config password monitor
Description
The FCIP Network Module comes configured with two default user passwords. The first password ‘
monitor
’
allows a user read-only access to view system configuration settings. With this password the user cannot make
any changes to settings. The second password ‘
manage
’ allows a user read-write access to view and/or modify
system configuration settings. For security reasons, it is highly recommended that the customer change these
passwords from the default values to new passwords as soon as possible. Note that the menu items under the
Password menu have the same names as the default passwords (
monitor
and
manage
). Also, ensure that you
change the passwords from the default values on each FCIP Network Module. There is no method for changing
the passwords on all modules at once; each FCIP Network Module must be set individually. It is recommended
that you change the passwords on all of the FCIP Network Modules on the OptiStar EdgeSwitch, then perform a
reset of the OptiStar EdgeSwitch (
see Section 4.8.5 ) for the password changes to take effect.
This menu item enables the user to set the
monitor
password. To set the
manage
password, please refer to
Section 6.1.6.3 .